On the control panel, press the [RADIO] / [AUDIO] button.
When the mode selection window displays, turn the [TUNE] knob to select the desired radio mode and then press the knob.

Press the [MENU/CLOCK] button on the control panel to access the following menu options:

Autostore: Save radio stations to the preset list.
Scan: The system searches for radio stations with strong radio signals and plays each radio station for about five seconds.
Sound Settings: You can change the settings related to sounds, such as location where sound will be concentrated and the output level for each range.
- Position: Select a location where sound will be concentrated in the vehicle. Select Fader* or Balance, turn the [TUNE] knob to select the desired position, and then press the knob. To set sound to be centred in the vehicle, select Centre.
- Tone: Adjust the output level for each sound tone mode.
- Speed Dependent Vol.*: Set the volume to be adjusted automatically according to your driving speed.
* if equipped
NOTICE
- Depending on vehicle models or specifications, available options may vary.
- Depending on the system or amplifier specifications applied to your vehicle, available options may vary.
Mode Popup: Set to display mode selection window when the [RADIO] / [AUDIO] button is pressed on the control panel.
Date/Time: You can change the date and time that are shown on the system display.
- Set Date: Set date to display on the system display.
- Set Time: Set time to display on the system display.
- Time Format: Select to display time in the 12 hour format or the 24 hour format.
- Display (Power Off): Set to display the clock when the system power is off.
Language: You can change the display language.