Rear View Monitor (RVM) (if equipped)
Rear View Monitor will activate when the engine is running and the shift lever is in the R (Reverse) position.
This is a supplemental function that shows behind the vehicle through the mirror or navigation display while backing-up.
Rear View Monitor is not a safety device. It only serves to assist the driver in identifying objects directly behind the middle of the vehicle. The camera does NOT cover the complete area behind the vehicle.
-
Never rely solely on the rear camera display when backing up.
-
ALWAYS look around your vehicle to make sure there are no objects or obstacles before moving the vehicle in any direction to prevent a collision.
-
Always pay close attention when the vehicle is driven close to objects, particularly pedestrians, and especially children.
-
Do not spray the camera or its surrounding area directly with a high pressure washer. Shock applied from high pressure water may cause the device to not operate normally.
-
Do not use any cleanser containing acid or alkaline detergents when cleaning the lens. Use only a mild soap or neutral detergent, and rinse thoroughly with water.
-
If the camera lens is covered with foreign material, Rear View Monitor may not operate normally. Always keep the camera lens clean. However, do not use chemical solvents such as strong detergents containing high alkaline or volatile organic solvents (gasoline, acetone etc.). This may damage the camera lens.