1. Place the light switch in the AUTO position.

2. Turn on the high beam by pushing the Light switch away from you.

3. High Beam Assist ( ) indicator will illuminate.

4. When the function is enabled, high beam will turn on when vehicle speed is above 40 km/h (25 mph). The High Beam ( ) indicator light will appear on the cluster. When vehicle speed is below 25 km/h (15 mph), high beam will not turn on and the High Beam Assist ( ) indicator light will appear white on the cluster.

   1. If the light switch is pushed away when High Beam Assist is operating, High Beam Assist will turn off and the high beam will be on continuously.

   2. If the light switch is pulled towards you when the high beam is off, the high beam will turn on without High Beam Assist canceled. When you let go of the light switch, the lever it will move to the middle and the high beam will turn off.

   3. If the light switch is pulled towards you when the high beam is on by High Beam Assist, the low beam will be on and High Beam Assist will turn off.

   4. If the light switch is placed to the headlamp position ( ), High Beam Assist will turn off and the low beam will be on continuously.

When High Beam Assist is operating, the high beam switches to low beam in the following conditions.

• When the headlamp of an on-coming vehicle is detected.

• When the tail lamp of a vehicle in front is detected.

• When the headlamp or tail lamp of a motorcycle or a bicycle is detected.

• When the surrounding ambient light is bright enough that high beams are not required.

• When streetlights or other lights are detected.

• When the light switch is not in the AUTO position.

• When High Beam Assist is off.

• When vehicle speed is below 30 km/h (19 mph).