Remote Smart Parking Assist (RSPA): (if equipped)

Remote Smart Parking Assist uses the front, front side, rear side, and rear ultrasonic sensors to detect parking spaces and control vehicle steering, speed, gear shifts, and help enter and exit parking spaces remotely from outside your vehicle.

Function

Description

Remote Operation

Remotely moving forward or backward

2026 Kia Tasman Remote Smart Parking Assist image. A top-down view shows the vehicle parked between two white vehicles, highlighted by a dotted line, with large red vertical arrows pointing forward and backward. Explains the function of remotely moving the vehicle forward or backward.
N_TK25E122
WARNING

  • Always ensure that the wide-angle camera lens is kept clean. If the lens is covered with foreign material, it can negatively impact camera performance and may result in Remote Smart Parking Assist not operating properly.

  • If a collision occurs or the outside mirror is adjusted manually, Remote Smart Parking Assist may not operate properly.

  • Never disassemble or apply any impact on the ultrasonic sensor or its surroundings.

  • If the ultrasonic sensor is blocked by foreign material like snow or rain, it may affect the detection performance and cause improper operation. Check the sensor and clean it with a soft cloth if it is dirty.

  • Avoid directly spraying the ultrasonic sensors with high-pressure washers.

  • Remote Smart Parking Assist may not operate properly when bumper height or ultrasonic sensor installation has been modified, if any accessories or stickers installed on the field of view of the ultrasonic sensor.

  • If the detecting sensor have been replaced or repaired, we recommend that you have your vehicle inspected by an authorized Kia dealer/service partner.

  • Do not push, scratch or strike the ultrasonic sensor. Sensor damage could occur.