Operating order
Smart Exit function operates in the following order:
-
Getting ready for exit
-
Checking space
-
Select exit direction
-
Smart Exit
1. Getting ready for exit
|
-
Agree must be selected on the infotainment system screen and the infotainment system has to operate properly to use Smart Exit function.
-
Drive below 5 km/h (3 mph) with the vehicle on and shift the gear to N (Neutral), Smart Exit function can be used.
-
If the function is turned on again after parallel parking is completed by Remote Smart Parking Assist, Smart Exit function can be used.
2. Checking space
|
-
When the vehicle is stopped by depressing the brake pedal, the vehicle sensors will detect the distance from nearby objects and check for space to exit.
-
When checking for space is complete, a message will appear on the infotainment system screen with an audible sound to notify the search is complete.
-
While checking for space, if there is a risk of collision with pedestrian, animal or object in the direction of vehicle exit, for your safety, Smart Exit function can be turned off.
-
Even if check for space is completed, objects in the blind spot area cannot be detected by the sensors. The driver must directly check the blind spot area and continue using the function.
Due to abnormal performance of the ultrasonic sensor or the influence of the surroundings, Parking function may not be able to search for a parking space even if there is a parking space, or may search for a space that is not suitable for parking.
3. Select exiting direction
|
-
With the vehicle stopped by depressing the brake pedal, the infotainment system screen displays the possible directions for parallel exit.
-
Touch the infotainment system screen to select the desired exit direction.
Before selecting the Exit Direction, the driver should check whether the space for exit is suitable. If the searched exit space by Remote Smart Parking Assist is narrow or unsuitable (surrounding vehicles are parked vertically, etc.), do not use the Smart Exit function.
4. Smart Exit
|
-
Press the Parking/View ( ) button when the vehicle is stopped by depressing the brake pedal.
-
When the brake pedal is released, Remote Smart Parking Assist will automatically control the steering wheel, vehicle speed and gearshift.
-
While Smart Exit function is operating, if you do not hold down the Parking/View button, the vehicle will stop and function control will pause. The function will start operating again when the Parking/View button is pressed and held again.
-
-
Hold the Parking/View ( ) button until the vehicle reaches the target exit location. When the vehicle reaches the target exit location, a message will appear on the infotainment system screen to inform you that exit is complete.
-
When the vehicle reaches the target exit location, a message will appear on the infotainment system screen to inform you that exit is complete.
-
-
Smart Exit function will not operate if the door is open or the seat belt is not fastened.
-
Vehicle speed can be adjusted by depressing the brake pedal while Smart Exit function is operating. However, the vehicle does not accelerate even when the accelerator pedal is depressed.
-
If exit is completed while depressing the brake pedal, Smart Exit function will complete with the gear in D (Drive).
-
If exit is completed while depressing the accelerator pedal, you must take your foot off the accelerator pedal once for the accelerator pedal to operate.
-
If there is no vehicle operation such as depressing the brake pedal or accelerator pedal within 4 seconds after exit is complete, the vehicle will automatically shift to P (Park) and engage EPB (Electronic Parking Brake).
-
After Exit function is complete, always check the surroundings before driving.