Smart Exit operation status
Operation status |
Turn signal |
---|---|
Under control |
The turn signal of the exit direction blinks until the exit is complete or Smart Exit is canceled. |
How to turn off Smart function while operating
-
Press the Parking/View ( ) button in the following stage:
-
Checking space
-
Select exit direction
-
-
Shift the gear to R (Reverse) in the following stage:
-
Checking space
-
Select exit direction
-
-
Press the Parking Safety ( ) button or select Cancel on the infotainment system screen to turn off Exit function.
-
While Smart Exit function is operating, if the vehicle is stopped by depressing the brake pedal, and the gear is shifted, Exiting function will turn off. At this time, EPB (Electronic Parking Brake) will not be engaged.
The function will pause in the following conditions when:
When Exit function is paused, the vehicle will stop. If the condition that made the function to pause disappears, the function may operate again.
-
There is a pedestrian, animal or object in the direction the vehicle is moving
-
The door or tailgate is open
-
The driver's seat belt is not fastened
-
When Parking Collision-Avoidance Assist, Blind-Spot Collision-Avoidance Assist or Rear Cross-Traffic Collision-Avoidance Assist operates
-
The Parking/View ( ) button is not continuously pressed
-
The vehicle is stopped by depressing the brake pedal
The function will cancel in the following conditions when:
When Smart Exit function is canceled, the vehicle will automatically stop, shift the gear to P (Park) and engage EPB (Electronic Parking Brake).
-
Smart Exit
-
The steering wheel is steered
-
The gear is shifted while the vehicle is moving
-
Operating EPB while the vehicle is moving
-
The hood is open
-
The driver opens the door with the seatbelt unfastened
-
Rapid acceleration occurs
-
Vehicle skid occurs
-
The wheel is stuck by an obstacle and cannot move
-
There are pedestrians, animals or objects at the front and rear of the vehicle at the same time
-
Approximately 3 minutes and 50 seconds have past after Smart Exit function has started to operate
-
The slope of the road exceeds the operational range
-
The function was paused for more than 1 minute
-
The steering wheel, gearshift, braking, and drive controls are not working normally
-
ABS, TCS or ESC system operates due to slippery road conditions
-
The charging door opens
-