Passenger's side
Operation
-
Press the following buttons at the same time for approximately 5 seconds for initialization.
-
Pressing the front portion of the relaxion comfort seat switch (the direction of the original position of the relaxion comfort seat)
-
Pressing the rear portion of the cushion height adjustment switch (the direction of lowering the cushion height)
-
Pressing the upper portion of the seatback angle adjustment switch (the direction of laying the backrest)
CAUTIONMake sure there are no obstacles around the passenger seat before initialization.
-
-
The initialization process are as follows:
-
The forward/backward position, seatback angle, height adjustment, and cushion tilt operate in sequence.
-
After all operations, initialization is complete.
-
Press the seat back angle adjustment switch to properly adjust the backrest before use.
-
Non-operating condition(s)
The initialization process will be interrupted in the following situations:
-
When the passenger's side seat adjustment switch is pressed
-
If the passenger side seat stops working during initialization, start initialization again.
-
After initialization, adjust the passenger seat to fit the passenger.