Search by Title only
Home > Safety features of your vehicle > Seat > Driver position memory system for power seat

Driver position memory system for power seat (if equipped)

A driver position memory system is provided to store and recall the driver seat, outside rearview mirror and Head-Up Display (HUD) position with a simple button operation.

By saving the desired position into the system memory, different drivers can reposition the driver seat based upon their driving preference. If the battery is disconnected, the desired seat position memory will need to be re-saved.

Driver seat/outside rearview mirror: location

Head-Up Display (HUD): height

WARNING

Driver position memory system

Never attempt to operate the driver position memory system while the vehicle is moving.

This could result in loss of control, and an accident causing death or serious injury.

CAUTION

The driver position memory system requires a large amount of electric power.

Refrain from using the system when the engine is stopped to prevent battery discharge.

Storing driver's seat positions

1
Place the ENGINE START/STOP button is ON while the vehicle stop.
2
Adjust the driver's seat and outside rearview mirror comfortable for the driver.
3
Press SET button on the control panel. The system will beep once.
4
Press one of the memory buttons (1 or 2) within 4 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.

When recalling an adjustment memory button while sitting in the vehicle, you can be surprised by the setting chosen if the memory has been adjusted by someone else. If that occurs, immediately push the seat position control switch in the direction of the desired position to stop further undesired movement.

Recalling positions from memory

Operate the following steps while the vehicle is stopped:

  • To recall a position already stored in the memory, press the desired memory button (1 or 2). The system will beep once, then the driver's seat will automatically adjust to the stored position.

If you adjust the control switch for the driver's seat while the system is recalling the stored position, the seat will stop and then move in the direction that the control switch is moved.

Setting the easy access function (if equipped)

The driver position memory system will move the driver's seat automatically as follows:

The driver can turn off or set the driver's seat settings in the user settings mode in the instrument cluster.

1
Press the MODE button () several times on the steering wheel until 'User Settings' menu appears on the LCD.
2
Select 'Convenience → Seat Easy Access → OFF/Normal/Extend' and 'Convenience → Seat upward/downward' with the MOVE switch ( / ) and the OK button on the steering wheel.

  • It will move the driver's seat rearward when the ENGINE START/STOP button is changed to the OFF position.

  • It will move the driver's seat forward when the ENGINE START/STOP button is changed to the ACC or START position and front driver's door is opened.

  • It will move the driver's seat forward and upward when the ENGINE START/STOP button is in ON. It will move the driver's seat backward and downward when the ENGINE START/STOP button is in OFF.

You can activate or deactivate this feature. Refer to More Details.

WARNING

Upward/downward movement of the seat may not work when passengers get on/off the vehicle in order to prevent foot injuries in certain places.

Resetting the driver position memory system

If the driver position memory system reset fails to work, initialize the system as follows.

How to initialize:

1
Stop the car and open the driver's door with the ENGINE START/STOP button in ON and the automatic shift lever in P (parking) position.
2
Pull the driver's seat forward as far as possible and have the seatback upright as much as possible using driver's seat forward/backward adjustment and seatback angle (recline) movement switches.
3
Push SET button and seat forward movement switch button for 2 seconds simultaneously.

Initialization in the process:

  1. Initialization begins as the alarm sounds.

  2. The seat and seatback will automatically move backwards. The alarm sound will continue while the system is in operation.

  3. Initialization will be all set after the seat and seatback move to the center with alarm sound being raised.

    However, the initialization process will come to a stop and the alarm sound will stop as well.

    • When pushing driving position memory system button

    • When pushing driver's seat height adjustment switch

    • When the driving speed exceeds 2 mph (3 km/h)

    • When the driver's door is closed

NOTICE

  • When the operation of the driver's seat and alarm sound stop during the initialization process, start the process again.

  • Make sure that there are no obstacles around the driver's seat before starting initialization.

  • When the initialization is finished, adjust the seat to a position comfortable for the driver and save it to the driver position memory system.