1. Press the Driving Assist button, to turn the function on. The CRUISE indicator in the instrument cluster will illuminate.

2. Accelerate to the desired speed. The set speed can be set as follows:

   • 20 mph (30 km/h) ~ 100 mph (160 km/h)

3. Push the SET- switch down, and release it at the desired speed. The set speed and vehicle to vehicle distance on the LCD screen will illuminate.

   

4. Release the accelerator pedal. The desired speed will automatically be maintained. If there is a vehicle in front of you, the speed may decrease to maintain the distance to the vehicle ahead. On a steep grade, the vehicle may slow down or speed up slightly while going uphill or downhill.

NOTICE

Vehicle speed may decrease on an upward slope and increase on a downward slope.

Each time the vehicle distance button is pressed, the vehicle distance changes as follows:

NOTICE

• If you drive at 56 mph (90 km/h), the distance is maintained as follows:

  • Distance 4 - approximately 172 ft. (52.5 m)

  • Distance 3 - approximately 130 ft. (40 m)

  • Distance 2 - approximately 106 ft. (32.5 m)

  • Distance 1 - approximately 82 ft. (25 m)

• The distance is set to the last set distance when the engine is restarted, or when Smart Cruise Control was temporarily canceled.

• Push the RES+ switch up, and release it immediately. The cruising speed will increase by 1 mph (1 km/h) each time the switch is operated in this manner.

• Push the RES+ switch up, and hold it while monitoring the set speed on the cluster. The cruising speed will increase by 5 mph or 10 km/h each time the switch is operated in this manner. Release the switch when the desired speed is shown, and the vehicle will accelerate to that speed. You can set the speed to 100 mph (160 km/h).

WARNING

Check the driving condition before using the RES+ switch. Driving speed may sharply increase when you push up and hold the RES+ switch.

• Push the SET- switch down, and release it immediately. The cruising speed will decrease by 1 mph (1 km/h) each time the switch is operated in this manner.

• Push the SET- switch down, and hold it while monitoring the set speed on the cluster. The cruising speed will decrease by 5 mph or 10 km/h each time the switch is operated in this manner.

• Release the switch at the speed you want to maintain. You can set the speed to 20 mph (30 km/h).

Press the CANCEL button or depress the brake pedal to temporarily cancel Smart Cruise Control.

• If any method other than the RES+ or SET- switch was used to cancel cruising speed and Smart Cruise Control is still activated, the set speed will automatically resume when you push the RES+ or SET- switch up or down.

• If you push the RES+ switch up, the speed will resume to the recently set speed. However, if vehicle speed drops below 5 mph (10 km/h), it will resume when there is a vehicle in front of your vehicle.

NOTICE

Always check the road conditions when you push the switch up (to RES+) to resume speed.

Press the Driving Assist button to turn Smart Cruise Control off.