With the ENGINE START/STOP button in the ON position, press MODE button () several times on the steering wheel until ‘User Settings’ menu appears on the LCD display. Select ‘Driver Assistance → Blind-Spot Safety’ from the setting menu to set whether or not to use each function.

• If ‘Active Assist’ is selected, Blind-Spot Collision-Avoidance Assist will warn the driver with a warning message, an audible warning and braking assist will be applied depending on the collision risk levels.

• If ‘Warning Only’ is selected, Blind-Spot Collision-Avoidance Assist will warn the driver with a warning message, an audible warning depending on the collision risk levels. Braking will not be assisted.

• If ‘Off’ is selected, Blind-Spot Collision-Avoidance Assist will turn off.

If you change the setting from ‘Off’ to ‘Active Assist’ or ‘Warning Only’, the warning light on the side view mirror (outside mirror) will blink for approximately 3 seconds.

In addition, if the engine is turned on, when the function is set to ‘Active Assist’ or ‘Warning Only’, the warning light on the side view mirror (outside mirror) will blink for approximately 3 seconds.

With the ENGINE START/STOP button in the ON position, press MODE button () several times on the steering wheel until ‘User Settings’ menu appears on the LCD display. Select ‘Driver Assistance → Warning Timing’ to change the initial warning activation time for Blind-Spot Collision-Avoidance Assist.

When the vehicle is first delivered, Warning Timing is set to ‘Normal’. If you change the Warning Timing, the warning time of other Driver Assistance system may change.

With the ENGINE START/STOP button in the ON position, press MODE button () several times on the steering wheel until ‘User Settings’ menu appears on the LCD display. Select ‘Driver Assistance → Warning Volume’ to change the warning volume to ‘High’, ‘Medium’, ‘Low’ or ‘Off’ for Blind-Spot Collision-Avoidance Assist.

If you change the Warning Volume, the warning volume of other Driver Assistance system may change.