To reduce the possibility of fogging up the inside of the windshield, the air intake or air conditioning are controlled automatically according to certain conditions such as or position. To cancel or return to the defogging logic, do the following.

1. Turn the ignition switch or ENGINE START/STOP button to the ON position.

2. Turn the mode selection knob to the defrost position ().

3. Push the air intake control button at least 5 times within 3 seconds.

The indicator light in the air intake control button will blink 3 times. It indicates that the defogging logic is canceled or returned to the pr gram med status.

If the battery has been discharged or disconnected, it resets to the defog logic status.

1. Turn the ignition switch or ENGINE START/STOP button to the ON position.

2. Select the defrost position pressing defrost button ().

3. While holding the air conditioning button (A/C) pressed, press the air intake control button at least 5times within 3 seconds.

The A/C display blinks 3 times. It indicates that the defogging logic is canceled or returned to the programmed status.

If the battery has been discharged or disconnected, it is reset to the defog logic status.