Replacing map lamp (Bulb type)
WARNING
Interior lamps
Prior to working on the Interior lamps, ensure that the "OFF" button is depressed to avoid burning your fingers or receiving an electric shock.
1
Turn off vehicle and disconnect the (-) battery terminal (For plug-in hybrid vehicle) or battery connector (For hybrid vehicle).
2
Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
3
Remove the bulb by pulling it straight out.
4
Install a new bulb in the socket.
5
Align the lens cover tabs with the lamp housing notches and snap the lens into place.
CAUTION
Be careful not to dirty or damage the lens, lens tab, and plastic housings.