Function settings
Setting
Safe Exit Warning
With the ENGINE START/STOP button in the ON position, select 'Driver Assistance → Blind-Spot Safety → Safe Exit Warning from the Settings menu to turn on Safe Exit Warning and deselect to turn off the function.
The driver should always be aware of unexpected and sudden situations from occurring. If 'Safe Exit Assist' is deselected, the function cannot assist you.
If the engine is restarted, Safe Exit Warning will maintain the last setting.
Warning timing
With the ENGINE START/STOP button in the ON position, select 'Driver Assistance → Warning Timing' from the Settings menu to change the initial warning activation time for Blind-Spot Safety system.
When the vehicle is first delivered, warning timing is set to 'Normal'. If you change the warning timing, the warning time of other Driver Assistance systems may change.
Warning volume
With the ENGINE START/STOP button in the ON position, select 'Driver Assistance → Warning Volume' from the Settings menu to change the warning volume to 'High', 'Medium', 'Low' or 'Off' for Blind-Spot Safety system.
However, when Warning Volume is turned off, the steering wheel vibration function will turn on if it was turned off.
If you change the warning volume, the warning volume of other Driver Assistance systems may change.
-
The setting of the Warning Timing and Warning Volume applies to all functions of the Safe Exit Warning.
-
Even though 'Normal' is selected for warning timing, if the vehicles approaches at high speed from the rear, the initial warning activation time may seem late.
-
Select 'Late' for warning timing when traffic is light and when driving speed is slow.
If the engine is restarted, Warning timing and Warning volume will maintain the last setting.