Function operation
Function warning
Collision warning when exiting vehicle

-
When an approaching vehicle from the rear is detected at the moment a door is opened, the 'Watch for traffic' warning message will appear on the cluster, and an audible warning will sound.
-
Safe Exit Warning will warn the driver when your vehicle speed is below 3 km/h (2 mph), and the speed of the approaching vehicle from the rear is above 5 km/h (3 mph).

Take the following precautions when using Safe Exit Warning :
-
For your safety, change the Settings after parking the vehicle at a safe location.
-
If any other function's warning message is displayed or audible warning is generated, Safe Exit Warning warning message may not be displayed and audible warning may not be generated.
-
You may not hear the warning sound of Safe Exit Warning if the surrounding is noisy.
-
Safe Exit Warning does not operate in all situations or cannot prevent all collisions.
-
Safe Exit Warning may warn the driver late or may not warn the driver depending on the road and driving conditions. Always check vehicle surroundings.
-
The driver and passengers are responsible for accidents that occurs while exiting the vehicle. Always check the surroundings before you exit the vehicle.
-
Never deliberately operate Safe Exit Warning. Doing so may lead to serious injury or death.
-
Safe Exit Warning does not operate if there is a problem with Blind-Spot Safety system. The warning message of Blind-Spot Safety system will appear when :
-
Blind-Spot Safety system sensor or the sensor surrounding is polluted or covered
-
Blind-Spot Safety system fails to warn passengers or falsely warn passengers
-

After the engine is turned off, Safe Exit Warning system operates approximately for 3 minutes, but turns off immediately if the doors are locked.