Rear View Monitor (RVM) (if equipped)

[1]: Wide-rear view camera

Rear View Monitor will activate when the back-up light is ON with the ignition switch ON and the shift lever in the R (Reverse) position.
Rear View Monitor is a supplemental function that shows behind the vehicle through Infotainment system whilst backing-up.

-
This function is a supplementary function only. It is the responsibility of the driver to always check the inside/outside rearview mirror and the area behind the vehicle before and whilst backing up because there is a dead zone that can't be seen through the camera.
-
If the camera lens is covered with foreign material, the Rear View Monitor may not operate normally. Always keep the camera lens clean.
However, do not use chemical solvents such as strong detergents containing high alkaline or volatile organic solvents (petrol, acetone etc.). This may damage the camera lens.