Blind-Spot Collision Warning settings
Blind-Spot Safety
With the ignition switch or ENGINE START/STOP button in the ON position, select or deselect ‘Driver Assistance → Blind-spot safety’ from the User Settings menu to set whether or not to use each function.
If ‘Warning only’ is selected, Blind-Spot Safety will warn the driver with a warning message, an audible warning depending on the collision risk levels.
If ‘Off’ is selected, Blind-Spot Collision Warning will turn off.
When the engine is restarted with Blind-Spot Collision Warning off, the ‘Blind-spot safety function is Off‘ message will appear on the cluster.
If you change the setting from ‘Off’ to ‘Warning only’, the warning light on the outside rearview mirror will blink for three seconds.
In addition, if the engine is turned on, when Blind-Spot Collision Warning is set to ‘Warning only’, the warning light on the outside rearview mirror will blink for three seconds.
If ‘Off’ is selected, the driver should always be aware of the surroundings and drive safely.
If the engine is restarted, Blind-Spot Safety function will maintain the last setting.
Warning timing
With the ignition switch or ENGINE START/STOP button in the ON position, select ‘Driver Assistance → Warning timing’ from the Settings menu to change the initial warning activation time for Blind-Spot Safety function.
When the vehicle is first delivered, Warning timing is set to ‘Normal. If you change the Warning timing, the warning time of other Driver Assistance functions may change.
Warning volume
With the ignition switch or ENGINE START/STOP button in the ON position, select ‘Driver Assistance → Warning volume’ from the Settings menu to change the Warning volume to ‘High’, ‘Medium’, ‘Low’ for Blind-Spot Safety function.
If you change the Warning volume, the Warning volume of other Driver Assistance systems may change.
-
The setting of the Warning timing and Warning volume applies to all functions of the Blind-Spot Safety function.
-
Even though ‘Normal’ is selected for Warning timing, if the vehicles approaches at high speed, the initial warning activation time may seem late.
-
Select ‘Late’ for Warning timing when traffic is light and when driving speed is slow.