Front seat adjustment for manual seat (if equipped)
Moving forward and backward
To move the seat forward or backward:
-
Pull the seat slide adjustment lever up and hold it.
-
Slide the seat to the position you desire.
-
Release the lever and make sure the seat is locked in place.
Reclining seatback
To recline the seatback:
-
Lean forward slightly and lift up the seatback recline lever.
-
Carefully lean back on the seat and adjust the seatback of the seat to the position you desire.
-
Release the lever and make sure the seatback is locked in place. (The lever MUST return to its original position for the seatback to lock.)
Reclining seatback
Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the protections of your restraint system (seat belts and/or air bags) is greatly reduced by reclining your seatback.
Seat belts must be snug against your hips and chest to work properly. When the seatback is reclined, the shoulder belt cannot do its job because it will not be snug against your chest. Instead, it will be in front of you. During an accident, you could be thrown into the seat belt, causing neck or other injuries.
The more the seatback is reclined, the greater chance the passenger's hips will slide under the lap belt or the passenger's neck will strike the shoulder belt.
Changing seat cushion height (for driver's seat)
To change the height of the seat cushion, push the lever upwards or downwards.
-
To lower the seat cushion, push down the lever several times.
-
To raise the seat cushion, pull up the lever several times.
Adjusting lumbar support (if equipped)
The lumbar support can be adjusted by pressing the lumbar support switch on the side of the seat.