Releasing the parking brake

Releasing the parking brake with EPB switch

OAYIEV096017R

  1. Turn on the vehicle.

  2. Engage the brake pedal.

  3. Press the EPB switch.

  4. Make sure the brake warning light is off.

Automatic release of EPB

The EPB is released automatically under following conditions:

  • The vehicle is in P (Park)

    With the vehicle running, engage the brake pedal and shift from P (Park) to R (Reverse) or D (Drive).

  • The vehicle is in N (Neutral)

    With the vehicle running, engage the brake pedal and shift from N (Neutral) to R (Reverse) or D (Drive).

For Electric Vehicle

  1. Start the vehicle.

  2. Fasten the driver’s side seatbelt.

  3. Close the driver side door, the bonnet, and the tailgate.

  4. Engage the accelerator pedal whilst the vehicle is in R (Reverse), or D (Drive).

Make sure the brake warning light is off.

CAUTION

  • Do not drive your vehicle with the EPB applied. Doing so may cause excessive brake pad and brake rotor wear.

  • Never allow passengers, children, or animals to touch the EPB.

  • Do not place any objects around the EPB, as they may cause it to operate unintentionally.

  • Whenever leaving the vehicle or parking, ensure the vehicle is shifted to P (Park) before applying the EPB. If necessary, block the tyres for added safety.

  • In winter, the EPB may freeze and fail to release. Avoid using the EPB, shift to P (Park), block the tyres, and park the vehicle on a flat and safe surface. If the EPB is engaged when you shift to P (Park), release both the AUTO HOLD and EPB, then park the vehicle with the tyres blocked.

  • Driving with the EPB applied may overheat the brake system, cause wear on the brake lines, and damage the EPB.

  • A click or whine from the electric brake motor may be heard when the EPB is engaged or released.

  • When handing over the vehicle to others, ensure they understand how to properly use the EPB for safety.

  • If the 12V battery charge is insufficient, the EPB may not apply or release. In such cases, connect to the auxiliary 12V battery.

NOTE
  • Do not follow the procedure below when driving on flat, level ground. Your vehicle may suddenly move forward.

    • You can engage the EPB even though the vehicle is in OFF position, but you cannot release the EPB.

    • Engage the brake pedal and release the parking brake manually with the EPB switch when driving downhill or backing up your vehicle.

  • If the brake warning light remains illuminated after you release the EPB, have your vehicle inspected by a professional workshop. Kia recommends visiting an authorised Kia dealer or service partner.