Using the transmitter (folding key)

Park the vehicle and stop the engine. Arm the system as described below.

  1. Turn off the engine and remove the ignition key from the ignition switch.
  2. Make sure that all doors (and tailgate), the engine hood are closed and latched.
  3. Lock the doors by pressing the lock button on the transmitter.

    After completion of the steps above, the hazard warning lights will blink once to indicate that the system is armed.

    If any door (and tailgate) or engine hood remains open, the hazard warning lights won't operate and theft-alarm will not arm. After this, if all doors (and tailgate) and engine hood are closed, the hazard warning lights blink once.

CAUTION

Do not arm the system until all passengers have left the vehicle. If the system is armed while a passenger(s) remains in the vehicle, the alarm may be activated when the remaining passenger(s) leave the vehicle. If any door, tailgate or engine hood is opened within 30 seconds after entering the armed stage, the system is disarmed to prevent unnecessary alarm.