After selecting 'High Beam Assist' in the Settings menu, HBA will operate by following the procedure below.

• Place the headlight switch in the AUTO position and push the headlamp lever for ward. The HBA () indicator light will appear on the cluster and the function will be enabled.

• When the function is enabled, the high beam will turn on when vehicle speed is above 20 mph (30 km/h). When vehicle speed is below 12 mph (20 km/h), the high beam will not turn on.

• The High Beam () indicator light will appear on the cluster when high beam is on.

When HBA is operating, if the headlight lever or switch is used, the function operates as follows:

• If the headlight lever is pulled towards you when the high beam is off, the high beam will turn on without HBA canceled. When you let go of the headlight lever, the lever will move to the middle and the high beam will turn off.

• When you push the headlight lever towards the instrument panel, the daytime running lights will turn on, and the high beam assist will turn off.

• By pulling the headlight lever backwards, the low beam will be turned on and HBA will be deactivated while the high beam is turned on by HBA.

• When you push the headlight lever forward, the high beam will be turned on and HBA will be deactivated.

• If the headlight switch is placed from AUTO to another position (headlight/position/off), HBA will turn off and the corresponding lamp will turn on.

When HBA is operating, high beam switches to low beam if any of the following conditions occur:

• When the headlight of an oncoming vehicle is detected.

• When the taillight of a vehicle in front is detected.

• When the headlight or taillight of a motorcycle or a bicycle is detected.

• When the surrounding ambient light is bright enough that high beams are not required.

• When streetlights or other lights are detected.