Overriding shift lock (For Mechanical type)

2026 Kia Tasman shift lock override image. The shift knob boot is highlighted in teal, with a red vertical arrow indicating the upward removal direction. A detailed inset view shows the internal mechanism with the shift lock override access hole (1). Explains the function of accessing the shift lock override mechanism.
N_TK25D013_1

Operation

  1. Continue depressing the brake.

  2. Turn the vehicle to the OFF position.

  3. Make sure the parking brake is applied.

  4. Carefully remove the shift knob boot.

  5. Insert a tool (e.g. flathead screwdriver) into the access hole and press down on the tool.

  6. Move the shift lever.

  7. Remove the tool from the shift lock override access hole.

  8. Insert a screwdriver into the access hole and press down on the screwdriver.

  9. Install the knob boot.

CAUTION

  • For safety when parking, always shift to P (Park) position and engage the parking brake, except in emergencies or when parking in N (Neutral).

  • If you must park in N (Neutral), make sure the vehicle is on level ground. Do not park in N (Neutral) on a slope, as the vehicle may move and cause an accident.

  • After turning off the engine, EPB cannot be released.

  • For vehicles equipped with EPB, if the AUTO HOLD is active when the vehicle is turned off, EPB will automatically engage. Therefore, make sure to deactivate AUTO HOLD before turning off the vehicle.

NOTE

If the shift lock override system does not work properly, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.