Rear Active Assist

  • If the function detects a risk of collision with a pedestrian or an object, Reverse Parking Collision-Avoidance Assist will warn the driver with an audible warning, steering wheel vibration and warning message on the cluster. When Rear View Monitor is operating, a warning will appear on the infotainment system screen.

  • If the function detects imminent collision with a pedestrian or an object behind the vehicle, the function will assist you with braking. The driver needs to pay attention as the brake assist will end within 2 seconds. The driver must immediately depress the brake pedal and check vehicle surroundings.

  • Brake control will end when:

    • The gear is changed to P (Park) or D (Drive).

    • The driver depresses the brake pedal with sufficient power

    • Braking assist last for approximately 2 seconds

  • The warning will turn off when:

    • The driver changes the gear to P (Park), N (Neutral), or D (Drive)

  • The brake control may not operate properly depending on the status of ESC (Electronic Stability Control).

  • There will only be a warning when:

    • The ESC (Electronic Stability Control) warning light is on

    • ESC (Electronic Stability Control) is engaged in a different function

WARNING

  • Playing the vehicle audio system at high volume may prevent passengers from hearing Reverse Parking Collision-Avoidance Assist warning sounds

  • Noise may be heard when sudden braking occurs to avoid a collision.

  • If any other warning sound such as the seat belt warning chime is already generated, Reverse Parking Collision-Avoidance Assist warning may not sound.

  • The performance of Reverse Parking Collision-Avoidance Assist may vary under certain conditions. If vehicle speed is above 2 mph (4 km/h), the function will provide collision avoidance assist only when pedestrians are detected. Always look around and pay attention when backing up your vehicle.