Wide view mode in Reverse
OMV033026L

When shifting to the R (Reverse) position, the DSM monitor screen can be set to switch to wide view. When switching to wide view, a guide line is displayed together, allowing you to check the parking lines of the vehicle next to you and the side/rear parking lines.

NOTE
  • Guidelines appearing on the DSM monitor when reversing indicate the following points:

    • Approximately 30 cm from the side of the vehicle

    • Approximately 50 cm and approximately 1 m from the rear of the vehicle

  • When shifting from R (Reverse) to N (Neutral) or driving at a speed of about 10 km/h (6 mph) or more after shifting to D (Drive), the normal view is switched.

  • The wide view works only when the DSM monitor screen switching function is used when reversing, and the general view works in P (Parking), N (Neutral), D (Driving) positions.

Operation

OMV033027L
  • Select L (driver's seat) or R (passenger's seat) with the DSM camera control selection lever (1).

  • When shifting to the R (Reverse) position, both DSM monitors switch to wide view.

  • When the DSM camera control select lever (1) is placed in the center position, both DSM monitors will not switch to wide view.

CAUTION

If there is a problem with the digital side mirror, the screen will not be displayed on the DSM monitor and the warning message Please check DSM system will be displayed in the cluster. At this time, check the surroundings with the rear side monitor screen displayed on the cluster and the interior mirror when the turn signal is operated, immediately stop in a safe place, and we recommend that you have your vehicle inspected by an authorized Kia dealer/service partner.