Detecting sensors (front view camera/front radar)



-
Do not apply foreign objects, such as a bumper sticker or a bumper guard, near the radar sensor.
Doing so may adversely affect the sensing performance of the radar.
-
Always keep the radar sensor and over clean and free of dirt and debris.
-
Use only soft clothes to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover.
-
Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, Forward Collision-Avoidance Assist may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by an authorized Kia dealer.
-
If the front bumper becomes damaged in the area around the radar sensor, Forward Collision-Avoidance Assist may not operate properly. In this case, have your vehicle inspected by an authorized Kia dealer.
-
Use only genuine parts to repair or replace a damaged sensor or sensor cover. Do not apply paint to the sensor cover.
-
Do not tint the window or install stickers or accessories around the inside mirror where the camera is installed.
-
Make sure the front view camera installation point does not get wet.
-
Do not impact or remove any front view camera/front radar components.
-
Do not place reflective objects (white paper or mirror etc.) on the dashboard. The function may activate unnecessarily due to reflection of the sunlight.
-
Excessive audio system volume may prevent occupants from hearing Forward Collision-Avoidance Assist warning alarm.