With the ignition switch in the ON position, Lane Keeping Assist turns on automatically. The indicator () in the cluster display will initially appear white. This indicates Lane Keeping Assist is in the READY but NOT ENABLED state.

If you press the Lane Safety button located on the instrument panel on the lower left hand side of the driver, Lane Keeping Assist will be turned off and the indicator on the cluster display will go off.

The color of the indicator will change depending on the condition of Lane Keeping Assist.

• White: Sensor does not detect the lane marker or vehicle speed is less than 64 km/h (40 mph).

• Green: Sensor detects the lane marker and function is able to control the steering.

The driver can change Lane Keeping Assist to Lane Departure Warning or change Lane Keeping Assist mode from the LCD display or infotainment system display. Go to the 'User Settings → Driver Assistance → Lane Safety → Lane Keeping Assist/Lane Departure Warning/Off'.

If your vehicle is equipped with an infotainment system, you can learn how to setup on the website via QR code in the infotainment quick reference guide.

• If you select ‘Lane Keeping Assist’, Lane Keeping Assist will automatically assist the driver’s steering when lane departure is detected to help prevent the vehicle from moving out of its lane.

• If you select ‘Lane Departure Warning’, Lane Keeping Assist will warn the driver with an audible warning when lane departure is detected. The driver must steer the vehicle.

• If you select ‘Off’, Lane Keeping Assist will turn off. The indicator light () will turn off on the cluster.

Note that the vehicle speed must be at least approximately 64 km/h (40 mph) to ENABLE Lane Keeping Assist. The indicator in the cluster will appear green.

The color of indicator will change depending on the condition of Lane Keeping Assist.

• White: Sensor does not detect lane markers or vehicle speed is under 64 km/h (40 mph).

• Green: Sensor detects lane markers and the function is able to control vehicle steering.