Standby mode

If You activate NSCC in the infotainment system and the operating conditions are met, NSCC will be ready to operate and the indicator light () will turn white in the cluster.

In operation

When the vehicle enters the curved section and the speed control function is activated, the indicator light () turns green and appears until the vehicle is out of the curved section.

Drive carefully.

When Navigation-based Smart Cruise Control cannot be activated, it is automatically deselected in the cluster and the indicator light () turns off. However, if Highway Driving Assist is activated, the indicator light () may turn on.

Highway Curve Zone Auto Slowdown

• Depending on the curve ahead on the highway (or motorway), the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.

• Vehicle deceleration time may differ depending on the vehicle speed and the degree of the curve on the road. The higher the driving speed, the faster the vehicle will decelerate.

Highway Set Speed Auto Change

• Highway Set Speed Auto Change function will operate when Smart Cruise Control set speed and the highway (or motorway) speed limit is matched.

• While Highway Set Speed Auto Change function is operating, when the highway (or motorway) speed limit changes, Smart Cruise Control set speed automatically changes to the changed speed limit.

• If Smart Cruise Control set speed is adjusted different from the speed limit, Highway Set Speed Auto Change function will be in the standby state.

• If Highway Set Speed Auto Change function has changed to the standby state by driving on a road other than the highway (or motorway) main road, Highway Set Speed Auto Change function will operate again when you drive on the main road again. At this time, the set speed does not need to be adjusted.

• If Highway Set Speed Auto Change function has changed to the standby state by depressing the brake pedal, press the () switch to restart the Highway Highway Set Speed Auto Change function.

• Highway Set Speed Auto Change function does not operate on highway interchanges or junctions.

NOTICE

• Highway Set Speed Auto Change function only operates based on the speed limits of the highway (or motorway), but it does not work with the speed cameras.

• When Highway Set Speed Auto Change function is operating, the vehicle automatically accelerates or decelerates when the highway (or motorway) speed limit changes.

• If the speed limit is higher than the speed limit of the speed camera while Highway Set Speed Auto Change function is operating, an audible warning may sound.

• The maximum set speed for Highway Set Speed Auto Change function to operate is 90 mph (140 km/h).

• If the speed limit of a new road is not reflected in the navigation, Highway Set Speed Auto Change function may not operate properly.

• If the speed unit is set to a unit other than the speed unit used in your state, Highway Set Speed Auto Change function may not operate properly.