Rear Collision-Avoidance Assist

  • If the function detects a risk of collision with a pedestrian or an object, the function will warn the driver with an audible warning, steering wheel vibration (if equipped), and warning message on the cluster. When Rear View Monitor is operating, a warning will appear on the infotainment system screen.

  • If the function detects imminent collision with a pedestrian or an object behind the vehicle, the function will assist you with braking. The driver needs to pay attention as the brake assist will end within 2 seconds. The driver must immediately depress the brake pedal and check vehicle surroundings.

  • Brake control will end when:

    • The gear is changed to P (Park) or D (Drive).

    • The driver depresses the brake pedal with sufficient power

    • Braking assist last for approximately 2 seconds

  • The warning will turn off when:

    • The driver changes the gear to P (Park), N (Neutral), or D (Drive)

  • The brake control may not operate properly depending on the status of ESC (Electronic Stability Control).

  • There will only be a warning when:

    • The ESC (Electronic Stability Control) warning light is on

    • ESC (Electronic Stability Control) is engaged in a different function

WARNING

  • Playing the vehicle audio system at high volume may prevent passengers from hearing Reverse Parking Collision-Avoidance Assist warning sounds

  • Noise may be heard when sudden braking occurs to avoid a collision.

  • If any other warning sound such as the seat belt warning chime is already generated, Reverse Parking Collision-Avoidance Assist warning may not sound.

  • The performance of Reverse Parking Collision-Avoidance Assist may vary under certain conditions. If vehicle speed is above 4 km/h (2 mph), the function will provide collision avoidance assist only when pedestrians are detected. Always look around and pay attention when backing up your vehicle.