Launch Control (For GT)
Launch Control provides maximum acceleration when the vehicle is at a complete stop. It also controls the vehicle to avoid unnecessary wheel spin when accelerating on the slippery road, optimizing vehicle's acceleration from a stationary position.
Launch Control settings
![]() OOVQ016072L |
|
When the vehicle is in DRIVE READY state, tap from the infotainment system screen.
Launch Control operation
![]() OOVQ016073L |
|
-
Step on the brake pedal over a certain level and then depress the accelerator pedal lightly. Launch Control Ready warning message will appear on the instrument cluster once Launch Control is ready to activate.
-
Once Launch Control is ready, pre-torque will be automatically initiated.
-
Start driving after releasing the brake pedal within 8 seconds.
Operating conditions
Launch Control will be activated when all of the following conditions are satisfied:
-
Drive mode is in GT (MY DRIVE mode: SPORT+)
-
ESC is in SPORT or OFF
-
Vehicle is in D (Drive)
-
Steering wheel is in straight position
-
No warning indicator lights
-
Normal wheel speed
-
Normal motor temperature
-
Launch Control will be cancelled once you release the accelerator pedal.
-
If you want to use Launch Control again, you must cool down the vehicle for more than approximately 2 minutes. (If the ready state exceeds 8 seconds, it is considered as used.)
-
Launch Control is limited when Speed Limit Assist is operating or the motor control unit is overheated.
-
Pre-torque: Torque is responsible for making your vehicle accelerate quickly from a stationary position.

