Using the Tyre Mobility Kit

CAUTION

Detach the speed restriction label from the compressor, and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too fast.

  1. Shake the sealant bottle.

    OOV065017

  2. Connect the sealant bottle to the compressor.

    OOV065020

  3. Unscrew the valve cap and screw the filling hose onto the tyre valve.

    OOV065016

  4. Make sure the compressor is turned off.

  5. Connect the power outlet connector into the vehicle's power outlet.

    OOV035021R

  6. Start the vehicle.

  7. Turn the compressor on and let it run for approximately 5–7 minutes to fill the sealant up to the proper pressure.

  8. Turn the compressor off.

  9. Detach the filling hose from the tyre valve.