Search by Title only
Home > Electric vehicle guide > EV menu > Vehicle To Load (V2L)

Vehicle To Load (V2L) (if equipped)

V2L is the system that provides AC power using the high voltage battery for driving to operate several electronical products.

A: Electric Vehicle

  1. EV Charge Transfer

Select EV → Vehicle to Load (V2L) on the screen.

You can set the battery discharging limit for high voltage battery for driving.

A: EV Charge Transfer Settings

  1. Discharging Limit

When the vehicle reaches the discharging limit, it automatically cuts the supply of electricity.

Energy information

To check the discharging level, go to the infotainment system screen and select EV and the vehicle image.

How to connect

Exterior

  1. Open the cover of the V2L connector.

  2. Close the cover after connecting compatible appliances and electronic products to the power outlet.

  3. Connect the V2L connector to the charging hole on the vehicle.

  4. Press the switch (1) of the V2L connector and check whether the light (2) is on or off. The light (2) may not turn on normally when:

    • The battery discharging limit is set higher than the actual charge of the battery. Check the battery discharging limit for high voltage battery for driving in Energy Consumption menu on the screen.

    • Check whether the light of V2L connector or interior power outlet turns on or not.

    • If the warning message for V2L appears on the cluster, refer to More Details.

    • If V2L does not work the same as when connecting other compatible appliances, have your vehicle inspected by an authorized Kia dealer.

  5. Press the switch (1) to turn off the light (2) the V2L will be off to stop V2L charging. You can disconnect the V2L connector when the light (2) has turned off or you have deactivated the charging door lock by pressing the door unlock button on the smart key.

Interior

  1. Use the mechanical key to unlock the power outlet cover.

  2. Connect to the power outlet located in the base of the rear seat with the EV button in the ON position.

  3. Check the operation status through the front indicator of the power outlet.

    • Blue: Standby

    • Red: No power supply even though the power outlet is connected

    • Green: Normal power supply through the normal connection of the power outlet.

LCD display messages

V2L has ended. Battery level has reached the set value

A: V2L has ended. Battery level has reached the set value

When the high voltage battery level reaches the discharging limit set level, the V2L will stop and the warning will be displayed. If you want to use the V2L continuously, make the discharging limit set level lower than the present battery level.

V2L stopped due to excessive power use

A: V2L stopped due to excessive power use

If you use an electrical appliance that exceeds the maximum power output the vehicle can supply, it will stop working and display a warning message. Make sure that the total power consumption of your electrical appliances does not exceed the V2L maximum power output.

V2L conditions not met

A: V2L conditions not met

If V2L is interrupted for any of the following reasons, a warning message is displayed.

  • V2L connector switch off

  • V2L connector overheating

  • Opening the charging door while using the V2L interior outlet

Make sure there are no problems with the V2L connector and the vehicle indoor outlet.

WARNING

Electrical shock, serious injury and death can result if you disobey the following instructions:

  • Do not touch the V2L connector or the terminals in the vehicle charging port.

  • Do not put metal objects to the V2L connector or charging port.

  • Do not touch the V2L connector, charging port or power plug with a wet hand or while standing in water or with bare feet.

  • Do not use the V2L connector, charging port or power plug if they are wet or dirty. Dry and clean them first.

  • Do not alter or disassemble the V2L connector.

  • When the power plug is connected or disconnected to the V2L connector or you open or close the connector cover of the V2L, be careful not to be scratched on the hand.

  • Do not charge if the V2L connector, charging port, power plug or cable are damaged, corroded or rusted.

  • Do not use if the sheath of home appliance cables is damaged or broken or the connection is loose.

WARNING

Do not use your vehicle as a power source for any high amperage appliances such as irons, coffee pots, and toasters. This could cause a fire, serious injury and death.

NOTICE

Be aware of the precautions below to prevent accidents.

  • If V2L charging has stopped before the vehicle is charged, it may be because the system has overheated. Check whether the V2L connector, charging port or power plug are contaminated, worn, corroded or broken or if the vehicle is drawing 16 amps. When the temperature falls to normal levels, you can use it again. Use only compatible appliances.

  • Do not remodel or disassemble the provided V2L connector. The failure caused by remodeling or disassembling is not covered by the warranty.

  • Do not drop the V2L connector or give a strong impact to it.

  • Do not place objects on the V2L connector.

  • Be sure to disconnect the V2L connector from the vehicle when you are finished using V2L.

  • When the high voltage battery charge reaches the set discharging limit (%), the operation stops, and a warning message is displayed on the instrument cluster. If you want V2L operation, set the discharging limit (%) lower than the current battery charge.

  • When using various electric appliances, use them below the maximum power capacity that can be supplied by the vehicle.

  • If you use an electrical appliance that exceeds the maximum power capacity that the vehicle can supply, the operation will stop and a warning message will be displayed on the instrument cluster. Make sure the total power consumption of the electrical appliance you use does not exceed the V2L maximum power capacity.

  • Some of the electric appliances may not operate normally even if the appliance has power consumption less than the maximum power capacity provided by the vehicle.

    • Electrical appliances that require high power during initial operation.

    • Measuring devices that need to process accurate data.

    • Electric appliances sensitive to inverter type AC power supply. (Inverter: A device that converts DC power into AC power)

  • Do not use appliances that require a continuous power supply, such as medical equipment. The power supply may be interrupted depending on the vehicle's condition.

  • Only use compatible appliances under 16 ampere.

  • Insert the power plug in fully and do not use plugs that are worn, corroded or broken, not meeting the standard. An electric shock or malfunction may occur.

  • Use the power plug with a ground connection.

  • Do not use high power home appliances such as air conditioner, washing machine or dryer.

  • Do not hang home appliances on the V2L charging cable.

  • For various devices connected to a power outlet, use only appliances that have obtained national safety certification. For usage and precautions, refer to the manual of the device. (Electrical appliances, multi-outlets, cord extension cables, etc.)

  • For electronic devices that are used outdoors in a vehicle, use a appliance with a waterproof function or use it in a waterproof environment. Do not use in environments with rain or high humidity. (Electrical appliances, multi-outlets, cord extension cables, etc.)

  • If there is a risk of lightning, do not use the V2L function outside the vehicle.

  • Do not connect portable multi-outlets.

  • Make sure the extension cable is not twisted. It may cause a fire. Be sure to use the cable without twisting it.

  • When using the V2L, power is also supplied to the vehicle's interior power outlet. Unplug electrical appliances that are not in use from the indoor power outlet.

  • When using the V2L, the cooling fan in the vehicle motor compartment can operate automatically even if the vehicle is turned off. Do not put your hand near the cooling fan in the V2L operating state.

  • Please connect the V2L connector to the charging hole within 60 seconds after the charging cover opens. To prevent theft after connecting, it is changed to auto lock automatically so that it is difficult to separate.

  • When using V2L, cancel the scheduled air conditioning setting. V2L may not be available to operate if the scheduled air conditioning is being activated.

  • V2L discharging mode will shut off if the vehicle is turned off using interior V2L.

  • Opening the charging door or connecting the V2L connector to the charging inlet, the V2L discharging mode will shut off. If you want to use the interior and exterior V2L simultaneously, first connect the V2L connector to the charging inlet and use the indoor V2L.