360° camera monitoring system operation

Parking/View button

Press the Parking/View button (1) to turn on or off 360° camera monitoring system.

Front view

Front view function is displayed on the screen when the gear is in N (Neutral) or D (Drive) to assist in parking. The front view has a top view, front view, side view and 3D view. Also, other view modes can be selected by pressing the view icons on the 360° camera monitoring system screen.

Operating conditions

Front view function will turn on when the following conditions are satisfied:

Shifting from R (Reverse) to N (Neutral) or D (Drive) and the vehicle speed is below approximately 10 km/h (6 mph).
Pressing the Parking/View button (1) when the gear is in D (Drive) or N (Neutral) and vehicle speed is below 10 km/h (6 mph).
Forward Parking Distance Warning warns the driver while driving in D (Drive) (Setup → Vehicle → Driver Assistance → Parking Safety → 360° camera monitoring system Auto On selected from the infotainment system screen)

Off conditions

Front view function will turn off when the following conditions are satisfied:

Press the Parking/View button (1) or the infotainment system button (2).
When vehicle speed is above 10 km/h (6 mph).
Press one of the infotainment system button (2), the screen will change to the infotainment system screen.
Shifting to P (Park).

NOTICE

If the 360° camera monitoring system is turned off after driving more than 10 km/h (6 mph), driving below 10 km/h (6 mph) again will not switch to the 360° camera monitoring system screen.

Rear view

Rear view function is displayed on the screen when the gear is in R (Reverse) or P (Park) to assist in parking. The rear view has a top view, rear view, side view and 3D view. Also, other view modes can be selected by pressing the view icons on the 360° camera monitoring system screen.

Operating conditions

Rear view function will turn on when the following conditions are satisfied:

Shifting to R (Reverse).
Pressing the Parking/View button (1) when P (Park) gear position is selected.

Off conditions

Rear view function will turn off when the following conditions are satisfied:

Shifting from R (Reverse) to P (Park).
Pressing the Parking/View button (1) when P (Park) gear position is selected.

NOTICE

Pressing the infotainment system button (2) will not turn the rear view off when the gear is in R (Reverse).

3D view

3D view function shows the vehicle in various angles. Press the 3D view icon on the 360° camera monitoring system screen to choose the angle. Press the 3D view icon again to reset the angle.

Operating conditions

3D view function will turn on when the following conditions are satisfied:

Shifting to P (Park), N (Neutral) or D (Drive) and the vehicle speed is below 10 km/h (6 mph).
When shifting to R (Reverse) and 360° camera monitoring system is on, Press 3D view icon on the 360° camera monitoring system screen.

Off conditions

3D view function will turn off when the following conditions are satisfied:

Vehicle in P (Park), N (Neutral) or D (Drive)
- Shifting to P (Park)
- Pressing the Parking/View button (1)
- Pressing the infotainment screen button (3)
- Pressing the home button on the 360° camera monitoring system screen (2)
- Vehicle speed is above 10 km/h (6 mph)
Vehicle in R (Reverse)
- Shifting to P (Park)

NOTICE

3D view function does not display the parking guide.