To turn on Smart Cruise Control

• Press the Driving Assist「」button to turn on the function. The speed will be set to the current speed on the cluster.

• If there is no vehicle in front of you, the set speed will be maintained, but if there is a vehicle in front of you, the speed may decrease to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will travel at a steady cruising speed after accelerating to the set speed.

NOTICE

If your vehicle speed is between 0~ 20 mph (0~ 32 km/h) when you press the Driving Assist「」button, the Smart Cruise Control speed will be set to 20 mph (32 km/h).

To set vehicle distance

Each time the button is pressed, the Vehicle Distance changes as follows:

NOTICE

• If you drive at 56 mph (90 km/h), the distance is maintained as follows:

  Distance 4 - approximately 172 ft. (52.5 m)

  Distance 3 - approximately 130 ft. (40 m)

  Distance 2 - approximately 106 ft. (32.5 m)

  Distance 1 - approximately 82 ft. (25 m)

• The distance is set to the last set distance when the engine is restarted, or when the function was temporarily canceled.

To increase speed

• Push the + switch up and release it immediately. The cruising speed will increase by 1 mph (1 km/h) each time the switch is operated in this manner.

• Push the + switch up and hold it while monitoring the set speed on the cluster. The cruising speed will increase by 5 mph (10 km/h) each time the switch is operated in this manner. Release the switch when the desired speed is shown, and the vehicle will accelerate to that speed. You can set the speed to 110 mph (180 km/h).

WARNING

Check the driving condition before using the + switch. Driving speed may sharply increase when you push up and hold the + switch.

To decrease speed

• Push the - switch down and release it immediately. The cruising speed will decrease by 1 mph (1 km/h) each time the switch is operated in this manner.

• Push the - switch down and hold it while monitoring the set speed on the cluster. The cruising speed will decrease by 5 mph (10 km/h) each time the switch is operated in this manner.

  Release the switch at the speed you want to maintain. You can set the speed to 20 mph (32 km/h).

To temporarily cancel Smart Cruise Control

Press the「」switch or depress the brake pedal to temporarily cancel Smart Cruise Control.

Resuming the function

To resume Smart Cruise Control after the function was canceled, push the +, - or「」switch.

If you push the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster.

If you push the「」switch, vehicle speed will resume to the preset speed.

WARNING

Check the driving condition before using the「」switch. Driving speed may sharply increase or decrease when you press the「」switch.

Turning off the function

Press the Driving Assist「」button to turn Smart Cruise Control off.

NOTICE

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist「」button to turn off Smart Cruise Control. However Manual Speed Limit Assist will turn on.

Based on Drive Mode

Smart Cruise Control will change acceleration based on the Drive Mode, N Mode or Active Eco.

• Based on Drive Mode

  Smart Cruise Control will change acceleration based on the drive mode selected from Drive Mode Integrated Control function. Refer to the following chart.

  Drive Mode	Smart Cruise Control
  COMFORT	Normal
  ECO	Slow
  SPORT	Fast
  SMART	Normal
  CUSTOM	Based on Powertrain mode

• Based on N mode

  Smart Cruise Control will change acceleration based on the N Mode. Refer to the following chart.

  N Mode	Smart Cruise Control
  OFF	Based on Drive mode
  ON	Fast

• Based on Active Eco

  Smart Cruise Control will change acceleration based on the Active Eco. Refer to the following chart.

  Active Eco	Smart Cruise Control
  OFF	Normal
  ON	Slow

NOTICE

• For more details on Drive Mode, refer to More Details.

• For the vehicle without the Drive Mode or Active Eco, acceleration of the Smart Cruise Control is set to 'Normal'.