Leading Vehicle Departure Alert

The Leading Vehicle Departure Alert warns the driver of the departure of the vehicle in front when the vehicle is stopped and Smart Cruise Control is in activation.

Setting Leading Vehicle Departure Alert

Press the MODE button () several times on the steering wheel until 'User Settings' menu appears on the LCD.
Select 'Drive Assistance → Leading vehicle departure alert' with the MOVE switch (/) and the OK button on the steering wheel.

With the vehicle ON, the Leading Vehicle Departure Alert function turns on and gets ready to be activated.

The function stops operation when the setting is deactivated. However, if the POWER button is turned off then on again, the function maintains the previous state.

Operating conditions

Your vehicle stops behind the vehicle in front when it stops. The message is displayed on the cluster within 3 seconds after the stop and the function will be in the standby position.

Leading Vehicle Departure Alert activation

If the driver does not take action for a certain period of time after the vehicle in front departs, the message is displayed on the cluster.

WARNING

Always check the front of the vehicle and road conditions before departure.