Activate upon Washer Fluid Use (if equipped)
To prevent the odor from entering to inside the vehicle, the ventilation system changes to Recirculated Air Mode for a while when the windshield washer fluid sprayed. However, at low outside temperature, to prevent from windshield fogging, the system continues to outside air mode.
System setting
-
ENGINE START/STOP button is ON or ignition switch ON.
-
Select Floor-Level () air flow direction by pressing Mode Selection button.
-
With pressing Air Conditioning button, press the Recirculated Air button more than 4 times within 2 seconds.
-
If the system is set up, the indicator on Recirculated Air button will blinks 6 times.
System cancellation
-
ENGINE START/STOP button is ON or ignition switch ON.
-
Select Floor-Level () air flow direction by pressing Mode Selection button.
-
With pressing Air Conditioning button, press the Recirculated Air button more than 4 times within 2 seconds.
-
If the system is cancelled, the indicator on Recirculated Air button will blinks 3 times.
Activation on washer fluid is activated when you select ‘Settings → Vehicle → Climate → Recirculate Air → Activate upon Washer Fluid Use’ from the Settings menu to turn on Activate upon Washer Fluid Use and deselect to turn off the function.