Headlamp and front fog lamp aiming (for Europe)
Headlamp aiming
-
Inflate the tires to the specified pressure and remove any loads from the vehicle except the driver, spare tire, and tools.
-
The vehicle should be placed on a flat floor.
-
Draw vertical lines (Vertical lines passing through respective head lamp centers) and a horizontal line (Horizontal line passing through center of head lamps) on the screen.
-
With the head lamp and battery in normal condition, aim the head lamps so the brightest portion falls on the horizontal and vertical lines.
-
To aim the low and high beams left or right, turn the driver (1) clockwise or counterclockwise. To aim the low and high beams up or down, turn the driver (2) clockwise or counterclockwise.
Front fog lamp aiming
The front fog lamp can be aimed as the same manner of the head lamps aiming.
With the front fog lamps and battery normal condition, aim the front fog lamps.
To aim the front fog lamp up or down, turn the driver clockwise or counterclockwise.
Aiming point
* A : Screen
Headlamp
|
Vehicle condition |
Headlamp (MFR type) |
Headlamp (BI-FUNCTION type) |
||
|---|---|---|---|---|
|
Ground Height |
Distance between lamps |
Ground Height |
Distance between lamps |
|
|
Low/High beam |
Low/High beam |
Low/High beam |
Low/High beam |
|
|
H1 |
W1 |
H1' |
W1' |
|
|
Without driver / [mm (in)] |
757 (29.8) |
1,259 (49.6) |
760 (29.9) |
1,250 (49.2) |
|
With driver / [mm (in)] |
747 (29.4) |
1,259 (49.6) |
750 (29.5) |
1,250 (49.2) |
|
Vehicle condition |
Headlamp (LED type) |
|||
|---|---|---|---|---|
|
Ground Height |
Distance between lamps |
|||
|
Low beam |
High beam |
Low beam |
High beam |
|
|
H1” |
H2” |
W1” |
W2” |
|
|
Without driver / [mm (in)] |
765 (29.9)*1 756 (29.8)*2 783 (30.8)*3 |
742 (29.2)*1 740 (29.1)*2 760 (29.9)*3 |
1,382 (54.4)*1*3 1,378 (54.3)*2 |
1,110 (43.7)*1*3 1,112 (43.8)*2 |
|
With driver / [mm (in)] |
760 (29.9)*1 751 (29.6)*2 778 (30.6)*3 |
737 (29)*1 735 (28.9)*2 755 (29.7)*3 |
1,382 (54.4)*1*3 1,378 (54.3)*2 |
1,110 (43.7)*1*3 1,112 (43.8)*2 |
* 1. 185/65R15
* 3. 205/55R17
* 2. 195/55R16
Front fog lamp
|
Vehicle condition |
Front Fog lamp (Bulb type) |
|
|---|---|---|
|
Ground Height |
Distance between lamps |
|
|
H3 |
W3 |
|
|
Without driver / [mm (in)] |
493 (19.4) |
1,431 (56.3) |
|
With driver / [mm (in)] |
483 (19.0) |
1,431 (56.3) |
-
Turn the low beam on without driver aboard.
-
The cut-off line should be projected in the cut-off line shown in the picture.
-
When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.
-
If head lamp leveling device is equipped, adjust the head lamp leveling device switch with 0 positions.
A : Vehicle axis
B : Vertical line of the left head lamp bulb center
C : Vertical line of the right head lamp bulb center
D : Horizontal line of head lamp bulb center
E : Ground
F : Cut-Off line
-
Turn the low beam on without driver aboard.
-
The cut-off line should be projected in the cut-off line shown in the picture.
-
When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.
-
If head lamp leveling device is equipped, adjust the head lamp leveling device switch with 0 positions.
A : Vehicle axis
B : Vertical line of the left head lamp bulb center
C : Vertical line of the right head lamp bulb center
D : Horizontal line of head lamp bulb center
E : Ground
F : Cut-Off line
-
Turn the front fog lamp on without the driver aboard.
-
The cut-off line should be projected in the allowable range (shaded region).
A : Vehicle axis
B : Vertical line of the left fog lamp bulb center
C : Vertical line of the right fog lamp bulb center
D : Horizontal line of fog lamp bulb center
E : Ground
F : Cut-Off line
G : Upper limit