Press the Driving Assist button to turn on the function. The set speed will be set to the current speed on the cluster.

• If there is no vehicle in front of you, the set speed will be maintained.

• If there is a vehicle in front of you, the set speed may be adjusted to maintain the distance to the vehicle ahead. If the vehicle ahead accelerates, your vehicle will travel at a steady cruising speed after accelerating to the set speed.

NOTICE

• If your set speed is between 0~30 km/h (0~20 mph) when you press the Driving Assist button, the Smart Cruise Control speed will be set to 30 km/h (20 mph).

• The Driving Assist button symbol may vary depending on your vehicle option.

Each time the button is pressed, the vehicle distance changes as follows:

If you drive at 90 km/h (56 mph), the distance is maintained as follows:

• Distance 4 - approximately 52.5 m (172 ft.)

• Distance 3 - approximately 40 m (130 ft.)

• Distance 2 - approximately 32.5 m (106 ft.)

• Distance 1 - approximately 25 m (82 ft.)

NOTICE

The distance is set to the last set distance when the engine is restarted, or when Smart Cruise Control was temporarily canceled.

Push the + switch up and release it immediately. The cruising speed will increase by 1 km/h (1 mph) each time the switch is operated in this manner.

• Push the + switch up and hold it. The cruising speed will increase by 10 km/h (5 mph) each time the switch is operated in this manner.

• You can increase the set speed to 200 km/h(120 mph).

WARNING

Check the driving condition before using the + switch. Driving speed may sharply increase when you push up and hold the + switch.

Push the - switch down and release it immediately. The cruising speed will decrease by 1 km/h (1 mph) each time the switch is operated in this manner.

• Push the - switch down and hold it. The cruising speed will decrease by 10 km/h (5 mph) each time the switch is operated in this manner.

• You can decrease the set speed to 30 km/h (20 mph).

Press the () switch or depress the brake pedal to temporarily cancel Smart Cruise Control.

To resume Smart Cruise Control after the function was canceled, operate the +, - or () switch.

• If you push the + switch up or - switch down, set speed will be set to the current speed on the cluster. If you press the () switch, set speed will resume to the preset speed.

WARNING

Driving speed may sharply increase or decrease when you press the () switch. It may cause a dangerous situation. Check the set speed before using the () switch.

Press the Driving Assist button to turn Smart Cruise Control off.

NOTICE

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist button to turn off Smart Cruise Control. However Manual Speed Limit Assist will turn on.

Smart Cruise Control will change acceleration based on the drive mode selected from Drive Mode Integrated Control function. Refer to the following chart.

NOTICE

• For more details on Drive Mode, refer to More Details.

• In some drive modes, Smart Cruise Control may be canceled or may not be turned on if the operating conditions are not satisfied.

• In vehicles without Drive Mode, Smart Cruise Control accelerate the vehicle in 'Normal' level.

• With the engine on, if 'Driver Assistance → Smart Cruise Control → Based on Driving Style' is selected from the Settings menu, Smart Cruise Control will operate based on the driver's driving style, such as vehicle distance, acceleration, reaction speed.

• While Smart Cruise Control is operating with 'Based on Drive Mode' selected, if you press and hold the Vehicle Distance () button, Smart Cruise Control will change to 'Based on Driving Style'. While Smart Cruise Control is operating with 'Based on Driving Style', if the Vehicle Distance () button is pressed, it will change to 'Based on Drive Mode'.

NOTICE

• If equipped with Based on Driving Style, 'Based on Drive mode' and 'Based on Driving Style' can be selected from the settings menu by selecting 'Driver Assistance → Smart Cruise Control'.

• If 'Based on Drive mode' is selected, Smart Cruise Control will operate based on the drive mode selected.

Driving Style Settings (if equipped) With the engine on, select 'Driver Assistance → Smart Cruise Control → Driving Style Settings' from the Settings menu to check the driver's driving style, and to change each driving style manually.

NOTICE

• 'Driving Style Settings' is displayed when 'Based on Driving Style' is selected.

• Smart Cruise Control learns the driver's driving styles only when the driver drives the vehicle.

The Warning Methods can be set with the vehicle on. Select 'Driver Assistance → Warning Volume' from the settings menu in the instrument cluster or 'Vehicle → Driver Assistance → Warning Methods' from the settings menu in the infotainment system to change the following settings:

• Warning Volume: Adjusts the volume of the warning sound.

  If you turn off the Warning Volume, for your safety, the function may warn you with a low volume.

• Driving Safety Priority: Lowers all other audio volumes when the Driving Safety system sounds a warning.

NOTICE

• If you change the Warning Methods, it can be applied to each function of the driver assistance system. Please check and change it in each function.

• If the vehicle is restarted, Warning Methods will maintain the last setting.

• The setting menu may not exist based on vehicle specification.