Search by Title only
Home > Driver assistance system > Manual Speed Limit Assist (MSLA) > Manual Speed Limit Assist operation

Manual Speed Limit Assist operation

To set speed limit

  1. Press and hold the Driving Assist () button at the desired speed. The Speed Limit () indicator light illuminates on the instrument cluster.

  1. Push the (+) switch up or (-) switch down, and release it at the desired speed. Push the (+) switch up or (-) switch down to change the set speed. Push and hold to increase or decrease to the nearest multiple of five (multiple of ten in km/h), and then increase or decrease by 10 km/h (5 mph).

NOTICE

Depending on the vehicle specifications, the set maximum speed is different. You cannot increase the set speed above the set maximum speed.

  1. Check the set speed limit on the instrument cluster.

  • If you want to drive over the set speed limit, depress the accelerator pedal far enough to activate the kickdown mechanism.

  • The set speed limit blinks and chime sounds until your vehicle speed decreases below the set speed.

NOTICE

When the accelerator pedal is not depressed beyond the pressure point, your vehicle speed maintains within the speed limit.

Temporarily pausing Manual Speed Limit Assist

Press the () button to temporarily cancel the set speed limit. The set speed limit turns off, but the Speed Limit () indicator light stays on.

Resuming Manual Speed Limit Assist

Operate the (+), (-) switch or () button.

If you push the (+) switch up or (-) switch down, the set speed is set to the current speed.

If you press the () button, the vehicle speed resumes to the previously set speed limit.

To turn off the speed limit control, do one of the following:

Press the Driving Assist () button to turn off Manual Speed Limit Assist. The Speed Limit () indicator off. Always press the Driving Assist () button to turn off Manual Speed Limit Assist when not in use.

CAUTION

To prevent serious injury:

  • Set your vehicle speed to the speed limit for the road in your area.

  • Keep Manual Speed Limit Assist off when not in use, to avoid unintentionally setting a speed. Check that the Speed Limit () indicator light is off.

  • Always drive defensively and pay attention to the driving task.