Front fog lamp (bulb type) bulb replacement (Fog lamp type A)
-
Disconnect the negative (-) battery terminal.
-
Disconnect the side after loosening the front bumper sides screws and clips.
-
Disconnect the front fog lamp connector.
-
Remove the bulb-socket from the assembly by turning the bulb-socket counterclockwise until the tabs on the bulb-socket align with the slots on the assembly.
-
Install the bulb-socket in the assembly by aligning the tabs on the bulb-socket with the slots in the assembly. Push the bulb-socket into the assembly and turn the bulb-socket clockwise.
-
Connect the front fog lamp connector.
-
Install the front bumper side assembly to the body of the vehicle.