Search by Title only
Home > Specifications & Consumer information > Recommended lubricants and capacities

Recommended lubricants and capacities

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle.

Lubricant

Volume (L)

Classification

Engine oil*1*2 (drain and refill)

Smartstream G1.0 TGDi / Smartstream G1.0 TGDi MHEV

Except Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

3.6

SAE 0W-20, API SN PLUS/SP or ILSAC GF-6*3

For Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

SAE 5W-30, ACEA A5/B5*4

Smartstream G1.2

Except Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

3.4

SAE 0W-20, API SN PLUS/SP or ILSAC GF-6*3

For Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

SAE 5W-30, ACEA A5/B5*4

Manual transmission fluid*6

Smartstream G1.0 TGDi / Smartstream G1.0 TGDi MHEV

1.5~1.6

SAE 70W, API GL-4

HK SYN MTF 70W (SK),

SPIRAX S6 GHME 70W MTF (H.K.SHELL)

GS MTF HD 70W (GS CALTEX)

Kia genuine MTF&DCTF 70W SYNTHETIC

Smartstream G1.2

1.3~1.4

Dual clutch transmission*6

Smartstream G1.0 TGDi / Smartstream G1.0 TGDi MHEV

1.6~1.7

Kia genuine DCTF 70W SYNTHETIC PLUS, HK D DCTF TGO-10 PLUS (SK), SPIRAX S6 GHDE 70W DCTF PLUS (H.K.SHELL)

Coolant

Smartstream G1.0 TGDi / Smartstream G1.0 TGDi MHEV

6MT

5.9

An Phosphate based ethylene glycol based coolant

7DCT

Smartstream G1.2

5MT

5.4

Brake / clutch fluid*7

0.7~0.8

SAE J1704 DOT-4 LV,ISO4925 CLASS-6,FMVSS116 DOT-4

Fuel

45

-

1. Refer to the recommended SAE viscosity numbers on the next page.

2. If a lower engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.

3. Requires <API SN PLUS/SP (or above) Full synthetic)> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.

4. Requires <API SN PLUS (or above) or ACEA A5/B5 Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.

5. Requires <API Latest (ILSAC Latest) or ACEA C5 Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.

6. If the genuine oil that is developed for the best performance is not used, it may cause the problems of transmission performance.

7. To maintain your vehicle’s best brake and ABS/ESC performance, use Kia genuine brake fluid as in the specification.

Recommended SAE viscosity number

CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.

NOTICE

Never add any additives to the engine oil. Engine oil additives can change the properties of engine oil and may cause serious engine failure.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

Temperature Range for SAE Viscosity Numbers

Temperature

°C

°F

Smartstream G1.0 T-GDi

Smartstream G1.0 T-GDi MHEV

Except Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

For Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

Smartstream G1.2

Except Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

For Middle East, Iran, Morocco, Algeria, Tunisia, Libya, Egypt, Sudan

An engine oil displaying this American Petroleum Institute (API) Certification Mark conforms to the International Lubricant Specification Advisory Committee (ILSAC). It is recommended to only use engine oils that uphold this API Certification Mark.