Before closing the hood, check the following:

All filler caps in engine compartment must be correctly installed.
Gloves, rags or any other combustible material must be removed from the engine compartment.

Return the support rod to its clip to prevent it from rattling.

Lower the hood until it is about 30 cm above the closed position and let it drop. Make sure that it locks into place.

Check that the hood has engaged properly. If the hood can be raised slightly, it is not properly engaged.

Open it again and close it with a little more force.

WARNING

Before closing the hood, ensure that all obstructions are removed from the hood opening. Closing the hood with an obstruction present in the hood opening may result in property damage or severe personal injury.
Do not leave gloves, rags or any other combustible material in the engine compartment. Doing so may cause a heatinduced fire.

WARNING

Always double check to be sure that the hood is firmly latched before driving away. If it is not latched, the hood could fly open while the vehicle is being driven, causing a total loss of visibility, which might result in an accident.
The support rod must be inserted completely into the hole provided in the hood whenever you inspect the engine compartment. This will prevent the hood from falling and possibly injuring you.
Do not move the vehicle with the hood raised. The view will be blocked and the hood could fall or be damaged.