Operating conditions

Basic function

Smart Cruise Control operates under the following conditions:

  • The gear is in D (Drive).

  • Your speed is within the operating range:

    • 5–120 mph (10–180 km/h)

    • 0–120 mph (0–180 km/h)

  • Electronic Stability Control (ESC) or Anti-lock Braking System (ABS) is ON.

Smart Cruise Control does not operate in the following conditions.

  • The driver’s door is open.

  • The electric vehicle is in power down mode

  • Electronic Parking Brake (EPB) is engaged.

  • ESC or ABS is controlling the vehicle.

  • Forward Collision-Avoidance Assist brake control is operating.

  • Remote Smart Parking Assist brake control is operating (if equipped).

NOTE

When stopped behind another vehicle, the driver can turn on Smart Cruise Control while the brake pedal is depressed.

Overtaking Acceleration Assist function

Overtaking Acceleration Assist will operate when the turn signal indicator is turned on to the left while Smart Cruise Control is operating, and the following conditions are satisfied:

  • Your speed is above 40 mph (60 km/h).

  • A vehicle is detected in front of your vehicle

Overtaking Acceleration Assist does not operate under the following conditions:

  • The hazard lights are ON.

  • Vehicle speed is reduced to maintain distance with the vehicle in front

WARNING

  • When the turn signal indicator is turned on to the left while there is a vehicle ahead, the vehicle may accelerate temporarily. Pay attention to the road conditions at all times.

  • Regardless of your country’s driving direction, Overtaking Acceleration Assist will operate when the conditions are satisfied. When using the function in countries with different driving direction, always check the road conditions at all times.