Starting the engine

Starting the gasoline engine

  1. Carry the smart key or leave it inside the vehicle.

  2. Firmly apply the parking brake.

  3. Manual Transmission- Depress the clutch pedal fully and shift to N (Neutral).

    Keep the clutch pedal and brake pedal depressed while pressing the ENGINE START/STOP button.

    Intelligent Variable Transmission/Dual Clutch Transmission - Shift to P (Park).

    Engage the brake pedal fully. You may start the engine when the gear is in N (Neutral).

  4. Press the ENGINE START/STOP button without engaging the accelerator pedal.

  5. Do not wait for the engine to warm up while your vehicle remains stationary. Start driving at moderate engine speeds. (Avoid rapid acceleration and deceleration.)

Starting the engine with smart key

N_SP3i26_C09_005_I

At the time that the vehicle doors are opened or when the ENGINE START/STOP button is pressed, the vehicle will check for the smart key.

If the smart key is not in your vehicle, the ( ) indicator and the message appear on the instrument cluster. If all doors are closed, the chime sounds for 5 seconds. The indicator or chime turns off while your vehicle is moving. Always have the smart key with you.

WARNING

The vehicle only starts when the smart key is in your vehicle. Never allow a child or any person who is unfamiliar with your vehicle to touch the ENGINE START/STOP button or related parts. Pressing the ENGINE START/STOP button while the smart key is in your vehicle may result in unintended engine operation or vehicle movement.

Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots, etc.) may interfere with your ability to use the pedals.

Do not start the vehicle with the accelerator pedal depressed. The vehicle can move and lead to an accident.

Wait until the engine rpm is normal. The vehicle may suddenly move if the brake pedal is released when the rpm is high.

CAUTION

If the engine stalls while your vehicle is in motion, do not attempt to shift to P (Park). If traffic and road conditions permit, you may shift to N (Neutral) while your vehicle is still moving, and press the ENGINE START/STOP button to attempt to restart the engine.

Do not operate the starter for more than 10 seconds. If the engine stalls or fails to start, wait approximately 5-10 seconds before trying again. Repeated or improper use of the starter may cause damage.

Do not turn the ignition switch to START position while the engine is running. It may damage the starter.

TIP

  • If the smart key battery is weak or the smart key does not work correctly, you can start the vehicle by pressing the ENGINE START/STOP button with a smart key.

  • If the brake light fuse is blown, you cannot start the engine normally.

    Replace the fuse with a new one. If this is not possible, start the vehicle by pressing the ENGINE START/STOP button in the ACC position for 10 seconds. The vehicle can start without the brake pedal engaged, but for your safety, always engage the brake pedal before starting the vehicle.