V2L power outlet: (if equipped)

OSVM086032L_2

The V2L power outlet supplies 115V/150W electric power to operate electric accessories or equipment in the vehicle.

If you wish to use the V2L power outlet, open up the cover and connect a plug to it with the vehicle is in POWER ON, DRIVE READY position, or in Utility Mode.

For more information, refer to Vehicle to Load (V2L).

CAUTION

Electric Accessory Devices

  • Do not use broken electric accessories which may damage the V2L power outlet and electrical systems of the vehicle.

  • Do not use two or more electric accessories at the same time. It may cause damage to the electrical systems of the vehicle.

NOTE

  • V2L stands for Vehicle to Load.

  • Rated voltage: AC 230V

  • In order to avoid an electrical system failure, electric shock, etc., be sure to read owner’s manual before use.

  • Be sure to close the cover except for when in use.

  • After using an electric accessory or equipment, pull the plug out. Leaving the accessory or equipment plugged in for a long time may cause 12V battery discharge.

  • Do not use an electric accessory or equipment the power consumption of which is greater than the capacity of the vehicle.

  • When the V2L input voltage is less than min. discharging voltage, power will turn off. The V2L will operate as normal when the voltage is increased.

  • While the power consumption of some electrical devices/appliances may be within the AC inverter’s electric power range, it may malfunction in cases below.

    • If the device/appliance requires high electric power for initial start up

    • If the device/appliance processes precise/very accurate data

    • If the device/appliance requires very stable supply of electricity