Eco-Coasting operation conditions
The Eco-Coasting system is activated when the accelerator pedal is depressed and released under the following conditions.
-
When the driving mode is ECO mode.
-
When driver acceleration is SMART ECO in SMART mode.
-
When the shift lever is in the D (Drive) position.
-
When the Smart Cruise Control button is OFF.
-
The accelerator or brake pedal is not depressed.
-
When the vehicle speed is within the range of 55 km/h (35 mph) to 160 km/h (100 mph).
-
If the road gradient is within the range of -5% to +5%.
-
In SMART mode, if the distance between the vehicle ahead and the relative speed is within a certain range (if Smart Cruise Control is equipped)
* If the front radar for Smart Cruise Control cannot operate normally, the inter-vehicle distance and relative speed condition are automatically ignored.
* The Eco-Coasting system works after the engine is turned on, the transmission is warmed up, and the engine sensor selfdiagnosis is completed after starting.
* Depending on the driving situation, Eco-Coasting operation may be temporarily delayed even if the above conditions are met.