Navigation-based Smart Cruise Control operation
Operating conditions
Navigation-based Smart Cruise Control is ready to operate if all of the following conditions are satisfied:
-
Smart Cruise Control is operating
-
Driving on main roads of highways (or motorways)
For more details on how to operate Smart Cruise Control, refer to More Details.
Navigation-based Smart Cruise Control display and control
When Navigation-based Smart Cruise Control operates, it will be displayed on the cluster as follows:
Navigation-based Smart Cruise Control standby
If the operating conditions are satisfied, the white (
) symbol will appear.
Navigation-based Smart Cruise Control operating
If temporary deceleration is required in the standby state and Navigation-based Smart Cruise Control is operating, the green
() symbol will appear on the cluster.
If the Highway Set Speed Auto Change function operates, the () symbol and set speed will appear in green on the cluster, and an audible warning will sound.
A: Drive carefully
The warning message will appear in the following circumstances:
-
Navigation-based Smart Cruise Control is not able to slow down your vehicle to a safe speed
Highway Curve Zone Auto Slowdown
-
Depending on the curve ahead on the highway (or motorway), the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.
-
Vehicle deceleration time may differ depending on the vehicle speed and the degree of the curve on the road. The higher the driving speed, deceleration will start faster.