FCA assesses the risk of a collision by monitoring several variables such as the distance to the vehicle/pedestrian ahead, the speed of the vehicle/pedestrian ahead, and the driver's operation of the vehicle. Certain conditions such as inclement weather and road conditions may affect the operation of FCA.

For the function operation, do not attempt risky driving.

• Do not apply foreign objects, such as a bumper sticker or a bumper guard, near the radar sensor.

  Doing so may adversely affect the sensing performance of the radar.

• Always keep the radar sensor and over clean and free of dirt and debris.

• Use only soft clothes to wash the vehicle. Do not spray pressurized water directly on the sensor or sensor cover.

• Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, FCA may not operate correctly. In this case, a warning message may not be displayed. have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• If the front bumper becomes damaged in the area around the radar sensor, FCA may not operate properly have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• Use only genuine parts to repair or replace a damaged sensor or sensor cover. Do not apply paint to the sensor cover.

• Do not tint the window or install stickers or accessories around the inside mirror where the camera is installed.

• Make sure the front view camera installation point does not get wet.

• Do not impact or remove any front view camera/front radar components.

• Do not place reflective objects (white paper or mirror etc.) on the dashboard. The function may activate unnecessarily due to reflection of the sunlight.

• Excessive audio function volume may prevent occupants from hearing FCA warning alarm.