Function setting

• The driver can activate the function by placing the ignition switch or ENGINE START/STOP button to the ON position and by selecting : Go to the "User Settings →Driver Assistance → Blind-Spot Safety" in the cluster.

  • BCA and BCW turn on and get ready to be activated when “Active Assist” is selected. Then, if a vehicle approaches the driver's blind spot area a warning sounds or braking power is applied.

  • BCW turns on and gets ready to be activated when “Warning Only” is selected. Then, if a vehicle approaches the driver's blind spot area a warning sounds.

  • The function is deactivated when 'Off' is selected.

Warning timing

The driver can select the initial warning activation time in the 'User Settings' on the LCD display by selecting ‘Warning timing'. The options for the initial Inattentive Driving Warning includes the following:

• The options for the initial Blind- Spot Collision Warning includes the following:

  • Normal: When this condition is selected, the initial Blind-Spot Collision Warning is activated normally. If this setting feels too sensitive change the option to “Late”. The warning activation time may feel late if the side/rear vehicle abruptly accelerates.

  • Late: Select this warning activation time when the traffic is light and you are driving in a low speed.

Operating conditions

The function enters the ready status, when ‘Active Assist’ or ‘Warning Only’ is selected and the following conditions are satisfied: