Leading Vehicle Departure Alert
This reminds the driver the leading vehicle’s driving departure after stopping.
Function setting
With the vehicle ON, Leading Vehicle Departure Alert function turns on and gets ready to be activated when the selecting “User Settings → Driver Assistance → Driver Attention Warning → Leading Vehicle Departure Alert”. The function stops operation when the setting is deactivated. However, if the vehicle is turned off then on again, the function maintains the previous state.
Operating conditions
If the driver does not take action for a certain period of time after the vehicle in front departs, the message is displayed on the cluster with a warning sound.
-
The function is a driver assistant device and it may not warn the driver even after the leading vehicle’s departure.
-
Even the function alert the driver the leading vehicle’s departure, always check the traffic condition by yourself before moving the vehicle.
-
Leading Vehicle Departure Alert function utilizes the front view camera on the front windscreen for its operation. To keep the front view camera in the best condition.For more information of front view camera, refer to More Details.
-
The function may not operate for 15 seconds after the engine is started or the front view camera is initialized.
The function may not warn or may not work properly when:
-
A pedestrian or a bicycle is ahead
-
A car cut in ahead.
-
Meet a traffic jam during the curve or right turn driving.
-
Busy road such as reducing lanes.
-
Stopping at a shoulder, rest area or a parking lot.
-
If the vehicle head makes a sudden start or the U-turn.
-
If the vehicle is stopped at the speed bumps or a slope.