1. Getting ready to remotely move forward and backward

There are two ways to operate Remote Operation function.

Method (1): Using the function with vehicle off

OCV105023N_2

  1. Within a certain range from the vehicle press the door lock button () on the smart key and lock all doors.

  2. Press and hold the Remote Start button () within 4 seconds until the vehicle starts.

For more details on remotely starting the vehicle, refer to Remote start (5).

Method (2): Using the function with vehicle on

OCV105024N_2
OCV054132L

  1. Remote Parking Instructions

  2. 1. Leave vehicle (keep the smart key). Close all doors.

  3. 2. Press and hold the Forward or Backward button on the smart key.

  1. Park the vehicle in front of the space where you want to use Remote Operation function, and shift the gear to P (Park).

  2. Press and hold the Parking/View button () to turn on Smart Parking Assist. A message Under REMOTE control will appear on the infotainment system screen.

  3. Get out of the vehicle with the smart key and close all doors.

NOTE

  • Agree must be selected on the infotainment system screen and the infotainment system has to operate properly to use Remote Operation function.

  • Method (2) can be used after the vehicle has been driven above 3 mph (5 km/h).

  • If the function is turned on again after parallel parking is completed by Remote Smart Parking Assist, Remote Operation function can be used with Method (2).

  • Before initiating the Remote Operation function from outside the vehicle, make sure not to leave any smart keys or digital keys inside the vehicle.

  • The Remote Operation function will not work if there is a spare smart key or spare digital key inside the vehicle.