Search by Title only
Home > Features of your vehicle > LCD display > LCD display modes

LCD display modes

* : if equipped

Mode

Driving Assist

Trip Computer

Turn By Turn (TBT)*

Information

Master Warning

Up/Down

Forward Collision-Avoidance Assist

Lane Keeping Assist

Blind-Spot Collision-Avoidance Assist

Smart Cruise Control

Lane Following Assist

Highway Driving Assist

Drive Info

Route Guidance

Energy Flow (AWD)

The Master Warning mode displays warning messages related to the vehicle when one or more systems is not operating normally.

Driver Attention Warning

After Recharging

Destination Info

TPMS

Intelligent Speed Limit Assist*

Accumulated Info

Trip modes

To change the trip mode, toggle the switch (/) on the steering wheel.

Electric energy economy

Average Energy Consumption (1)

  • The average energy consumption is calculated by the total driving distance and the high voltage battery consumption since the last average energy consumption reset.

  • The average energy consumption can be reset both manually and automatically.

Manual reset

To clear the average energy consumption manually, press the OK button on the steering wheel for more than 1 second when the average energy consumption is displayed.

Automatic reset

To automatically reset the average energy consumption select either menu from the 'Energy Consumption Reset' in the Cluster menu on the infotainment system screen.

  • At Vehicle Start: The average energy consumption will reset automatically whenever it has passed 4 hours after turning OFF the vehicle.

  • After recharging: The average energy consumption will reset automatically when driving speed exceeds 1 mph (1 km/h), after recharging more than 10%.

NOTICE

The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average energy consumption will be recalculated.

Instant Energy Consumption (2)

  • The instantaneous energy consumption is displayed according to the bar graph in the LCD display while driving.

Driving Assist mode

This mode displays the state of:

  • Forward Collision-Avoidance Assist

    Lane Keeping Assist

    Blind-Spot Collision-Avoidance Assist

    Smart Cruise Control

    Lane Following Assist

    Highway Driving Assist

  • Driver Attention Warning

  • Speed Limit System

Trip computer mode

* You may change through items in the following order.

Drive Info

A: Drive Info

  1. Accumulated trip distance

  2. Average energy consumption

  3. Total driving time

This display shows the accumulated trip distance (1), the average energy consumption (2), and the total driving time (3).

The information is combined for each ignition cycle. However, drive Info screen will reset when the driver's door is opened after turning off the vehicle, or the vehicle is turned on after 3 minutes have passed.

The driving information will continue to be counted while the vehicle is in the READY mode (for example, when the vehicle is in traffic or stopped at a stop light).

NOTICE

The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the driving information is recalculated.

After Recharging

A: After recharging

  1. Accumulated trip distance

  2. Average energy consumption

  3. Total driving time

This display shows the accumulated trip distance (1), the average energy consumption (2), and the total driving time (3) after recharging.

To manually reset the information, press and hold the OK button when viewing the After Recharging.

Accumulated Info

A: Accumulated Info

  1. Accumulated trip distance

  2. Average energy consumption

  3. Total driving time

This display shows the accumulated trip distance (1), the average energy consumption (2), and the total driving time (3).

The information is accumulated starting from the last reset.

To reset the details, press and hold the OK button when viewing the Accumulated driving info. The accumulated trip distance, the average energy consumption, and total driving time will reset simultaneously.

The accumulated driving information will continue to be counted while the vehicle is in the READY mode (for example, when the vehicle is in traffic or stopped at a stop light).

NOTICE

The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average accumulated driving information is recalculated.

Energy flow (AWD) (if equipped)

  • The electric vehicle system informs the drivers its energy flow in various operating modes.

  • The distribution status of the driving power of the front and rear wheels are displayed when Auto AWD mode is activated. For more details, refer to More Details.

Turn By Turn (TBT) mode

This mode displays the Navigation status.

Information mode

Tire pressure

A: Low tire pressure

Master warning mode

This mode informs you of the following situations:

  • Driver assistance system malfunction, limitation or radar/camera blockage

  • LED headlamp malfunction

  • Lamp malfunction

  • TPMS failure, low tire pressure, etc.

At this time, a Master Warning icon () will appear in the lower right corner on the LCD display. If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.

Service Interval

A: Service Interval

  1. Service interval schedule

To reset the service interval, select SetupVehicleClusterService IntervalReset.

NOTICE

Calculates and displays when you need a scheduled maintenance service (mileage or days). If the remaining mileage or time reaches 900 miles (1,500 km) or 30 days, the message Service in is displayed for several seconds each time you set the vehicle to the ON position.

Driver Assistance settings (infotainment system)

Select SetupVehicleDriver Assistance on the infotainment system screen to set the Driver Assistance function.

  • Driver Assistance

    • Smart Cruise Control

    • Driving Convenience

    • Speed Limit

    • Warning Timing

    • Warning Volume

    • Driver Attention Warning

    • Forward Safety

    • Lane Safety

    • Blind-Spot Safety

    • Parking Safety

Vehicle settings (infotainment system)

  1. Press the Settings button on the head unit of the infotainment system.

  2. Select Vehicle and change the setting of the features.

Vehicle Settings in the infotainment system provides user options for a variety of settings including door lock/unlock features, convenience features, driver assistance settings, etc.

  • Vehicle Settings

    • Driver Assistance

    • Drive Mode

    • Eco Vehicle

    • Active Sound Design

    • Head-up Display

    • Cluster

    • Climate

    • Seat

    • Lights

    • Door

    • Convenience

WARNING

Do not operate the Vehicle Settings while driving. This may cause distraction resulting in an accident.

NOTICE
  • The information provided may differ depending on which features are applicable to your vehicle.

  • For detailed information, refer to the separately supplied infotainment system manual.